SL10-24V LED Strip Light 1000 lumens/m IP65

(3 customer reviews)

£13.14£105.20
£10.95£87.67excluding VAT

Medium strength high density LED Strip ideal for display lighting.

Microtech Flexible LED Strip Light IP65 With High Grade Epistar 3014 LEDs

Manufactured using latest ultra efficient Epistar 3014 LEDs, waterproof to IP65 rating using waterproof micro coating; almost invisible and highly effective. Fitted with ‘3M’ self adhesive backing for a secure fit.

Micro Tech LED Strip Advantages

  • Better heat dissipation compared to thick Gel/Silicone coated LED Strips.
  • Lower temperature: extends life of LEDs, reduces light decay.
  • Protects against steam and water damage.
  • No discolouring of waterproof coating.
  • LEDs are mounted on a white PCB (Printed Circuit Board) for an attractive finish.

Specification

Energy RatingA
LED Quantity120 LED/Metre
LED Type/BrandSMD 3014 Epistar
Luminous flux (light output)936 lm/m(Warm), 948 lm/m(Natural), 1010 lm/m(Pure), 916 lm/m(Cool)
Power Consumption9.6 W/m
Average life50,000 hours
Input Voltage24V DC
DimmableYes (additional dimmer switch required)
Beam angle120°
Cable Length300mm
Waterproof RatingIP65
Width10mm
Thickness2mm
Warranty5 Years

Download Data Sheet

Description

For indoor use only. For outdoors we recommend our Fully Waterproof IP68 LED Strip.

Strip Lengths

This strip is sold by the metre. 24v LED Strip Lights are manufactured and supplied in 10m lengths, so purchases of strips less than 10m in length are non-returnable after they have been cut to size for you.

We supply 10 metre strips with an input cable at both ends. Shorter strips have an input cable at one end.

You can cut the strip to length yourself (with scissors), to as small as every 6 LEDs (5cm).

Up to 10 metres of LED strip can be wired in series with the driver. Additional LED strips need to be connected in parallel (see the Diagram).

N.B ‘clip on’ connectors cannot be used with this LED strip due to the high density of LEDs. Soldered connections can be made instead, contact us for advice.

Additional information

Weight0.2 kg
Strip Length

1m, 2m, 3m, 4m, 5m, 6m, 7m, 8m, 9m, 10m

Light Colour

Warm White ~ 3000 kelvin, Natural White ~ 4000 kelvin, Pure White ~ 5000 kelvin, Cool White ~ 6000 kelvin

3 reviews for SL10-24V LED Strip Light 1000 lumens/m IP65

  1. John Peel

    This flexible LED strip is amazing. I used the 10 metre length with the appropriate driver and dimmer for high level up lighting. I also used it in conjunction with the aluminium profile strip and translucent covers, essential for a professional job. The service and delivery from LED lighthouse is second to none.

  2. Peter Hollis

    This is a superb product very bright even light. I used on a lighting pelmet with a dimmer and I’m glad I bought the dimmer. Probably too bright to have full on all the time. \r\n\r\nTwo sided fixing tape is very sticky. Easy to pull the whole tape away from the led. Fiddly to get started just pulling away the brown backing paper.

  3. Peter Hollis

    This is a superb product very bright even light. I used on a lighting pelmet with a dimmer and I’m glad I bought the dimmer. Probably too bright to have full on all the time. \r\n\r\nTwo sided fixing tape is very sticky. Easy to pull the whole tape away from the led. Fiddly to get started just pulling away the brown backing paper.

Add a review

Your email address will not be published.

More Information

24V Power Supply

You need a LED 24 Volt Driver to power LED flexible strip. Each metre of this strip requires 9.6 watts, so choose a driver powerful enough to supply the total wattage required.

Power Requirement

Strip Length (M)12345678910
Power (W)10202939485868778796

Need help putting a kit together?

Contact the LED Strip experts now!