LED Dimmers

See all our LED Dimmers below and our options available when dimming white or single colour 12V or 24V LED Strip Lights.

More about LED Dimmers

Options when Dimming white or single colour 12V or 24V LED Strip Lights

Mains Voltage Dimming

Mains Voltage Dimming is suitable when a “traditional” wall-mounted dimmer switch must be used. A “Dimmable Mains to low voltage” LED Driver must also be used to power the lighting.

Mains Voltage dimming circuit for LED Strip Lights

12/24V Dimming

12V/24V Dimming is the most popular way of dimming our LED Strip. A 12V/24V dimmer controller and a standard 12V/24V LED Driver must be used. It usually offers a better range of dimming compared to mains dimming and allows remote control, wifi or touch panel dimming.

LED RGB Strip connection diagram

0/1-10V Dimming

0/1-10V Dimming is usually used for commercial or large domestic LED Strip installations. A 0/1-10V dimmer switch is required to generate the 0/1-10V control signal. A 0/1-10V dimmable Driver receives the 0/1-10V control signal and PWM dims the output at 12 or 24V (depending on the Driver). Multiple 0/1-10V Drivers can be used with one dimmer switch allowing for a large setup with smooth and gradual dimming range.

Dimmable 0/1-10V LED Driver Circuit Diagram

Dimming RGB(W) Colour Changing LED Strip Lights

RGB(W) LED Strip is controlled by a Colour Controller which dims as well as colour change. No additional dimmer control can be used from this section for RGB(W) lights.

LED Dimmers