COB10-24V-IP68 Waterproof White LED Strip

£28.75£119.00excluding VAT

The only LED Strip suitable for use outdoors or in very wet areas, IP68 waterproof.

Fitted with Epistar LEDs

This LED strip is built with high grade Epistar LEDs for superior performance. This strip is fitted with 480 LEDs per metre. The light strip is waterproof to IP68 rating, encapsulated in a square silicone tube and injected with liquid silicone making it completely water tight.

This LED strip has been designed so the LEDs operate at half capacity. This is to reduce the possibility of the LEDs overheating inside the thick waterproof coating encasing them.

Add Ons:


Energy RatingA
LED Quantity480 LED/Metre
LED Type/BrandSMD 2835 / Grade A ‘Epistar’
Luminous flux (light output)1041 lm/m(Warm), 1146 lm/m(Natural)
Light colour3000k, 4000k
Power Consumption10 W/m
Average life50,000 hours
Input Voltage24 V DC
Beam angle180°
Cable Length1m
Waterproof RatingIP68
Warranty3 Years

Download Data Sheet


Strip Lengths

This LED strip is sold in 2.5m, 5m, 7.5m and 10m lengths. We can also supply bespoke lengths in increments of 5cm by special order with a 10-14 day lead time – Contact us for details.

As standard, this LED Strip is manufactured and supplied in 10m lengths, so purchases of strips other than these standard lengths are non-returnable as they have been cut to size or specially manufactured for you.

We supply 10m strips with an input cable at both ends. Other length (2.5m, 5m and 7.5m) strips have an input cable at one end.

Cutting and Sealing the LED Strip

The Waterproof LED strip can be cut with scissors, to as small as every 5cm. Once cut the end of the LED strip will need sealing. We sell small tubes of clear silicone and clear rubber end caps which can be used to seal the cut end of the LED strip. Select the ‘Sealing Kit’ in the blue options box if required. The kit includes two end caps and 1 small tube of silicone.

The LED strip is self adhesive backed, however water can degrade the adhesive over time. Alternatively, we sell clear mounting clips which screw down to secure the LED strip. Select ‘Mounting Clips’ in the blue options box if required. They are sold in packs of 20.

Up to 10 metres of LED strip can be wired in series with a 24V driver. Additional LED strips need to be connected in parallel (see the Diagram).

Additional information

Light Colour

Warm White ~ 3000 kelvin, Natural White ~ 4000 kelvin

Strip Length

2.5m, 5m, 7.5m, 10m

Sealing Kit Required

No, Yes

Mounting Clips Required

No, Yes


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

More Information

24V Power Supply

You need a LED 24 Volt Driver to power LED strip. Each metre of this strip requires 10 watts, so choose a driver powerful enough to supply the total wattage required.

Power Requirement

Strip Length (M)12345678910
Power (W)10202939495868788797

Need help putting a kit together?

Contact the LED Strip experts now!