24V RGBW LED Strip Lights IP65

(4 customer reviews)

£17.50£143.22
£14.58£119.35excluding VAT

Available in lengths up to 10m and cuttable every 10cm, 24V RGBW LED strip. It has the same energy consumption and light output as our 12V RGBW strip but is not limited to 5 metre lengths.

The difference between 12V and 24V LED Strips

  • Colour controllers can control twice the amount of strip at 24V.
  • Up to 10m of 24V strip can be powered in series, compared to 5m at 12V.
  • The maximum length of a single strip is 5m at 12V and 10m at 24V.
  • 12V LED strip can be cut every 3 LEDs, 24V every 6 LEDs.

Specification

Energy RatingA
LED Quantity60 LED/Metre
LED Type/BrandIntegrated RGBW
Luminous flux (light output)1000 lm/m (RGB+White)
Power Consumption19.2 W/m
Average life50,000 hours
Input Voltage24 V DC
DimmableYes
ColourVarious, depends on controller used.
Beam angle120°
Cable Length300mm
Waterproof RatingIP65
Width12mm
Thickness3mm
Warranty5 Years

Download Data Sheet

Description

RGBW LED Strip Fitted With The Latest Integrated RGB/White LED

This LED strip is fitted with a hybrid white and colour changing LED chips, ideal when both lighting effect are required.

Our RGBW LED Strip features the latest integrated LED giving a superior colour mix and colour strength compared with separate RGB and White chips. Consisting of 60 RGBW LEDs per metre. LEDs are mounted on a white PCB (Printed Circuit Board). Our RGBW strip lights have a 3M self adhesive backing for easy installation.

Microtech Flexible LED Strip Light IP65 With High Grade Sanan RGBW LEDs

Manufactured using ultra efficient RGBW LEDs from Sanan, waterproof to IP65 rating using waterproof micro coating; almost invisible and highly effective.

Micro Tech LED Strip Advantages

  • Better heat dissipation compared to thick Gel/Silicone coated LED Strips.
  • Lower temperature: extends life of LEDs, reduces light decay.
  • Protects against steam and water damage.
  • No discolouring of waterproof coating.
  • LEDs are mounted on a white PCB (Printed Circuit Board) for an attractive finish.

For indoor use only. For outdoors we recommend our Fully Waterproof IP68 RGB LED Strip.

Additional information

Weight0.2 kg
Light Colour

RGB + Warm White ~ 3000k, RGB + Natural White ~ 4000k, RGB + Pure White ~ 6000k

Strip Length

1m, 2m, 3m, 4m, 5m, 6m, 7m, 8m, 9m, 10m

4 reviews for 24V RGBW LED Strip Lights IP65

  1. Michael Kellas

    Strip works perfectly, the colours are nice and bright only problem I had was when i cut the strip to smaller lengths the connectors which clip on to the contactors didn’t seem to connect properly which meant a lot fiddling about to get all the colours to work correctly. Used a Stanley to scratch the copper connectors on the strip just in case there was some kind of film or something left on that was blocking the current and it seemed to help. It’s only downfall unfortunately other than that it’s great.

  2. Simon Howarth

    Client love them, very easy to fit. Worked very well with controller be aware the transformer if quite big.

  3. Ken Smith

    Used around a plinth on a kitchen island. Really bright and even light spread. I will be ordering more for the rest of the plinths

  4. Adrian C.

    Good quality strip lighting. Rapid delivery and helpful technical support.

Add a review

Your email address will not be published.

More Information

Strip Lengths

This strip is sold by the metre. 24v LED Strip Lights are manufactured and supplied in 10m lengths, so purchases of strips less than 10m in length are non-returnable after they have been cut to size for you.

We supply 10 metre strips with an input cable at both ends. Shorter strips have an input cable at one end.

You can cut the strip to length yourself (with scissors), to as small as every 6 LEDs (10cm).

Up to 10 metres of LED strip can be wired in series with the controller. Additional LED strips need to be connected in parallel (see the Diagram).

24V Power Supply

You need a LED 24 Volt Driver to power LED flexible strip. Each metre of this strip requires 19.2 watts, so choose a driver powerful enough to supply the total wattage required.

Power Requirement

Strip Length (M)12345678910
Power (W)2039587796116135154173192

Colour Controller

You need a colour controller to control RGBW LED flexible strip. The controller allows the selection of different colours and lighting effects. Our controllers also allow the strip to be dimmed.

Need help putting a kit together?

Contact the LED Strip experts now!