Flexible LED Strip to Strip Connector RGB 10mm 4 Pin

This connector is used to connect two lengths of RGB colour changing LED strip together. The LED strip light must be 10mm. Before this connector can be used, gel waterproof coatings must be removed 7mm from the end of both LED strips. The LED strip can then slide inside the connector, passing under the metal arms. Ensure the arms are pushing down onto the copper contacts of the LED Strip. Then close the connector cover, ensuring the teeth clamp directly onto the circuit board of the LED strip not the gel coating.

This connector can be used with our Nano Tech LED Strip providing the thin waterproof coating is removed from the top of the copper terminals first. This can be done using a sharp blade or fine sandpaper.

This connector is approximately 150mm long.

This connector is only suitable for connecting up to 5m of LED strip. To power longer lengths a soldered connection is required.

£2.71
£2.26excluding VAT

6059 in stock

SKU: CON-INT-RGB-FLEX Categories: ,

Additional information

Weight0.01 kg

1 review for Flexible LED Strip to Strip Connector RGB 10mm 4 Pin

  1. Malcolm Peters

    The intermediate conenctors are a bit fiddly to use. This is because the adhesive on the back of the LED strip catches as you slide the strip into the connector. A good idea but needs a bit of patience.

Add a review

Your email address will not be published.