SL12-24V LED Strip Light 1200 lumens/m IP65

(2 customer reviews)

£10.86£89.76
£9.05£74.80excluding VAT

High powered LED Strip, cost efficient and ideal for task lighting . This 12 Watt per metre strip is fitted with the larger 2835 LEDs for high performance. Each LED is much brighter than our 3014 chip allowing a reduced LED density, making this our lowest cost/lumen LED Strip to buy.

Microtech Flexible LED Strip Light IP65 With High Grade Epistar 2835 LEDs

Manufactured using latest ultra efficient Epistar 2835 LEDs, waterproof to IP65 rating using waterproof micro coating; almost invisible and highly effective. Fitted with ‘3M’ self adhesive backing for a secure fit.

Micro Tech LED Strip Advantages

  • Better heat dissipation compared to thick Gel/Silicone coated LED Strips.
  • Lower temperature: extends life of LEDs, reduces light decay.
  • Protects against steam and water damage.
  • No discolouring of waterproof coating.
  • LEDs are mounted on a white PCB (Printed Circuit Board) for an attractive finish.

Specification

Energy RatingA
LED Quantity60 LED/Metre
LED Type/BrandSMD 2835 / Grade A ‘Epistar’
Luminous flux (light output)1159 lm/m(Warm), 1183 lm/m(Natural), 1222 lm/m(Pure), 1175 lm/m(Cool)
Power Consumption12 W/m
Average life50,000 hours
Input Voltage24 V DC
DimmableYes (additional dimmer switch required)
Beam angle120°
Cable Length300mm
Waterproof RatingIP65
Width10mm
Thickness1.5mm
Warranty5 Years

Download Data Sheet

Description

For indoor use only. For outdoors we recommend our Fully Waterproof IP68 LED Strip.

Strip Lengths

This strip is sold by the metre. 24v LED Strip Lights are manufactured and supplied in 10m lengths, so purchases of strips less than 10m in length are non-returnable after they have been cut to size for you.

We supply 10 metre strips with an input cable at both ends. Shorter strips have an input cable at one end.

You can cut the strip to length yourself (with scissors), to as small as every 6 LEDs (10cm).

Up to 10 metres of LED strip can be wired in series with the driver. Additional LED strips need to be connected in parallel (see the Diagram).

Additional information

Weight0.2 kg
Strip Length

1m, 2m, 3m, 4m, 5m, 6m, 7m, 8m, 9m, 10m

Light Colour

Warm White ~ 3000 kelvin, Natural White ~ 4000 kelvin, Pure White ~ 5000 kelvin, Cool White ~ 6000 kelvin

2 reviews for SL12-24V LED Strip Light 1200 lumens/m IP65

  1. John Dickinson

    Great lights. Very bright just what my wife wanted.

  2. Roger Cliffe

    Used in high level hidden uplighting application (on top of roof beams) with only around 15cms of space between strip and ceiling. I was concerned about the amount of light I would get in the room, but I am pleased with the result. The warm white colour is pleasing too. Mounted on low profile aluminium strip as a heat sink, so hopefully will get long life. Adhesive backing seems ok. On a helpful note, the website does say to be sure to scrape off the lacquer and glue from the top/underside of the strips if cutting and reconnecting – this is important to get a good electrical connection so make sure you do it!

Add a review

Your email address will not be published.

More Information

24V Power Supply

You need a LED 24 Volt Driver to power LED flexible strip. Each metre of this strip requires 12 watts, so choose a driver powerful enough to supply the total wattage required.

Power Requirement

Strip Length (M)12345678910
Power (W)1224364860728496108120

Need help putting a kit together?

Contact the LED Strip experts now!