Edge Lit LED Strip Light IP65

£17.50£126.98
£14.58£105.82excluding VAT

Side mounted LEDs cast light to the side of the LED strip, ideal for cover lighting among other applications.

Nanotech Flexible LED Strip Light IP65 With High Grade Epistar 3014 LEDs

Manufactured using latest ultra efficient Epistar 3014 LEDs, waterproof to IP65 rating using waterproof nano coating; almost invisible and highly effective. Fitted with ‘3M’ self adhesive backing for a secure fit.

Nano Tech LED Strip Advantages

  • Better heat dissipation compared to thick Gel/Silicone coated LED Strips.
  • Lower temperature: extends life of LEDs, reduces light decay.
  • Protects against steam and water damage.
  • No discolouring of waterproof coating.
  • LEDs are mounted on a white PCB (Printed Circuit Board) for an attractive finish.

Specification

Energy RatingA
LED Quantity84 LED/Metre
LED Type/BrandSMD 3014 / Grade A ‘Epistar’
Luminous flux (light output)1004 lm/m(Warm), 1039 lm/m(Natural), 1030 lm/m(Pure)
Power Consumption10 W/m
Average life50,000 hours
Input Voltage24V DC
DimmableYes (additional dimmer switch required)
Beam angle120°
Cable Length300mm
Waterproof RatingIP65
Width10mm
Thickness2mm
Warranty5 Years

Download Data Sheet

Description

For indoor use only. For outdoors we recommend using fully waterproof IP68 LED Strip, Contact us for details.

Strip Lengths

This strip is sold by the metre. 24v LED Strip Lights are manufactured and supplied in 10m lengths, so purchases of strips less than 10m in length are non-returnable after they have been cut to size for you.

We supply 10 metre strips with an input cable at both ends. Shorter strips have an input cable at one end.

You can cut the strip to length yourself (with scissors), to as small as every 6 LEDs (7cm).

Up to 10 metres of LED strip can be wired in series with the driver. Additional LED strips need to be connected in parallel (see the Diagram).

N.B ‘clip on’ connectors cannot be used with this LED strip due to the high density of LEDs. Soldered connections can be made instead, contact us for advice.

Additional information

Weight0.2 kg
Strip Length

1m, 2m, 3m, 4m, 5m, 6m, 7m, 8m, 9m, 10m

Light Colour

Warm White ~ 3000 kelvin, Natural White ~ 4000 kelvin, Pure White ~ 5000 kelvin

1 review for Edge Lit LED Strip Light IP65

  1. Paul Richardson

    This is an excellent LED strip. It yields a very passable 70 lumens-per-watt ratio using the efficient smd3014 LEDs instead of the more common smd335. The 84 leds/mtr gives an even illumination and allows cut-points every 70mm.

Add a review

Your email address will not be published.

More Information

24V Power Supply

You need a LED 24 Volt Driver to power LED flexible strip. Each metre of this strip requires 10 watts, so choose a driver powerful enough to supply the total wattage required.

Power Requirement

Strip Length (M)12345678910
Power (W)102030405060708090100

Need help putting a kit together?

Contact the LED Strip experts now!