SL10-12V White LED Strip Light 1000 lumens/m IP65

(38 customer reviews)

£10.95£43.84excluding VAT

Medium strength high density LED Strip ideal for display lighting.

Microtech Flexible LED Strip Light IP65 With High Grade Epistar 3014 LEDs

Manufactured using latest ultra efficient Epistar 3014 LEDs, waterproof to IP65 rating using waterproof micro coating; almost invisible and highly effective. Fitted with ‘3M’ self adhesive backing for a secure fit.

Available in Warm White (3000k), Natural White (4000k), Pure White (5000k) and Cool White (6000k).

Micro Tech LED Strip Advantages

  • Better heat dissipation compared to thick Gel/Silicone coated LED Strips.
  • Lower temperature: extends life of LEDs, reduces light decay.
  • Protects against steam and water damage.
  • No discolouring of waterproof coating.
  • LEDs are mounted on a white PCB (Printed Circuit Board) for an attractive finish.


Energy RatingA
LED Quantity120 LED/Metre
LED Type/BrandSMD 3014 / Grade A ‘Epistar’
Luminous flux (light output)942 lm/m(Warm), 957 lm/m(Natural), 1012 lm/m(Pure), 920 lm/m(Cool)
Power Consumption9.6 W/m
Average life50,000 hours
Input Voltage12 V DC
DimmableYes (additional dimmer switch required)
Beam angle120°
Cable Length300mm
Waterproof RatingIP65
Warranty5 Years

Download Data Sheet


For indoor use only. For outdoors we recommend our Fully Waterproof IP68 LED Strip.

Strip Lengths

This strip is sold by the metre. 12v LED Strip Lights are manufactured and supplied in 5m lengths, so purchases of strips less than 5m in length are non-returnable after they have been cut to size for you.

We supply 5 metre strips with an input cable at both ends. Shorter strips have an input cable at one end.

You can cut the strip to length yourself (with scissors), to as small as every 3 LEDs (2.5cm).

Up to 5 metres of LED strip can be wired in series with the driver. Additional LED strips need to be connected in parallel (see the Diagram).

N.B ‘clip on’ connectors cannot be used with this LED strip due to the high density of LEDs. Soldered connections can be made instead, contact us for advice.

Additional information

Weight0.2 kg
Strip Length

1m, 2m, 3m, 4m, 5m

Light Colour

Warm White ~ 3000 kelvin, Natural White ~ 4000 kelvin, Pure White ~ 5000 kelvin, Cool White ~ 6000 kelvin

38 reviews for SL10-12V White LED Strip Light 1000 lumens/m IP65

  1. Mark Jenner

    Low level plinth illumination. Good product, easy to fit except scraping the terminals for joins a bit fiddly.

  2. Andrew Gough

    Excellent product, easy to set up……………………………….

  3. Mark Baker

    Used under wall cabinets to light work serface in kitchen. Really bright and the light colour matches perfectly with the less bright SL5 LED strip that we have elswhere in the room.

  4. Steve Mitchell

    Good product – very bright…………………….

  5. Garry Sutherland

    Good product. Does what it is supposed to do…. Recommended…

  6. Andrew Rae

    Five stars says it all. Good product………………..

  7. Derek Manly

    I use the White strip for modifying vehicle interior lighting. May try it when converting bulb torches to LEDs.

  8. Peter Spedding

    Used in under cabinet and over shower lighting. Seems well made. Light output is good. 120LED/m mean it can’t be used with push fit connectors – tight packing of LEDs prevent closure of connector. This means fiddly preparation (scraping off protective coating) and precision soldering of each connection. Too early to comment on durability.

  9. Ken Whittaker

    used for concealed lighting behind tv and picture as well as in built in headboard illumination and reading lights

  10. Andrew Rae

    get brightest for kitchen worktop and warm for ceiling keep em separate for economy use.

  11. David Farrow

    Nice and bright, Slim, sticky. Decent quality solder terminals and good resistance to being bent. Pure/Natural White is very similar.

  12. Martin Turner

    I followed supplier’s advice and stuck the strip to a self-adhesive aluminium tape to act as heat sink

  13. Curtis Culshaw

    Led strip purchased with aluminium channel and accessories plus led driver to replace old wall unit fluorescent fitting. Makes a tidy job and excellent light onto worktop

  14. Graham Taylor

    We use this product for kitchen counter illumination. Warm white is a very cosy lighting effect.

  15. Stephen McLaughlin

    Good item …………………………………………

  16. Khoi Nguyen

    Very bright………………………………….

  17. Rad Ainley

    Good light and the right temperature too. Well impressed.

  18. Alex Grigg

    Best I’ve found ………………………………..

  19. Keith Stock

    LED strip used to illuminate a Plaque unveiled by HRH Prince of wales. Simple to install and just right for the job.

  20. Karen McConnon (verified owner)

    Good quality light from product ……………….

  21. Chris Vousden (verified owner)

    All working ……………………………………..

  22. Lloyd Green (verified owner)

    I would recommend these to my biker friends ……

  23. Natasha Redrup (verified owner)

    Lighting display furniture 24/7 ………………

  24. Samanchai Boonton (verified owner)

    Easy to install . . . . . . . . . . . . . . . . . .

  25. Peter Cole (verified owner)

    I will use it to improve lighting in our Campervan and reduce drain on the leisure Battery

  26. Kim Baker (verified owner)

    Great product ………………………………

  27. paul moss

    I bought 5m for aquarium lighting in 120cm tank. Only used 2x1m and the light levels are excellent for’easy’ aquarium plants. Note you cannot use a connector to link lengths, you need to solder wires because the strip is so narrow. This is the best LED strip I’ve come across and the light level produced is amazing. Plus the waterproofing is like a spray on layer, not the normal plastic dome (which tends to discolour after a couple of years use).

  28. Robin Jones (verified owner)

    I have mostly used the lighting for under kitchen units and shelves, I work as an electrician and would always use this company as they are far better than any electrical wholesalers

  29. Ian Tate (verified owner)

    good light output easily fit looks a quality product

  30. Adam Russell (verified owner)

    Still experimenting with range of purchases to compare colour & brightness, expected use is home lighting.

  31. Peter Crees (verified owner)

    Additional transformer and Led strip purchased to extend over and under cupboard lighting in a kitchen.

  32. Nicholas Campbell (verified owner)

    Easy to fit and the natural light shade looks very nice

  33. Shaun Henderson (verified owner)

    Ordered Sunday\r\nDispatched Monday\r\nDelivered Tuesday before 12. \r\nExcellent service, Good communication and east to install. \r\n\r\nMany thanks

  34. Steven Norris (verified owner)

    Quality product with a nice colour temperature at Warm. Not the ‘warmest’ warm white but great colour regardless. Perfect for under kitchen cabinet lighting, installed in an aluminium channel with milky diffuser and provide perfect brightness.

  35. Oliver Korodi (verified owner)

    easy fixing, and these are good working …………….

  36. Gerwyn Lewis (verified owner)

    It would have been 5 star but some of the double sided tape peeled off the LED strip rather than the tape itself to stick to a kitchen worktop. Hopefully it won’t cause a long term problem with coming off. Soldering was delicate but once sussed, there are many wiring options. functionality is fantastic so far with a solid strip of light and dimmer connected.

  37. Nicholas Arnold (verified owner)

    After two bad experiences with cheaper brands, colour variances between rolls & yellowing of the silicon coating, I did some research & decided to try Epistar 3014 LED in natural white. The colour temperature is exactly as described & 100% consistent over 20 meters. The light output is excellent as you would expect from 120 LED/m. The nano coating makes the srip much easier to work with than the less flexible silicon coated alternatives. Highly recommended & well worth paying a little extra for.

  38. Peter B. (verified owner)

    nice warm light, ideal to enhance my kitchen display cupboard

Only logged in customers who have purchased this product may leave a review.

More Information

12V Power Supply

You need a LED 12 Volt Driver to power LED flexible strip. Each metre of this strip requires 9.6 watts, so choose a driver powerful enough to supply the total wattage required.

Power Requirement

Strip Length (M)12345
Power (W)1020293948

Need help putting a kit together?

Contact the LED Strip experts now!