Bendable Zig Zag” LED Strip Light IP65″

£49.84
£41.53excluding VAT

Unique ‘Zig Zag’ PCB, designed for turning corners on the flat. It’s often used to back light letters.

Microtech Flexible LED Strip Light IP65 With High Grade Epistar 2835 LEDs – 5m

Manufactured using latest ultra efficient Epistar 2835 LEDs, waterproof to IP65 rating using waterproof micro coating; almost invisible and highly effective. Fitted with ‘3M’ self adhesive backing for a secure fit.

Micro Tech LED Strip Advantages

  • Better heat dissipation compared to thick Gel/Silicone coated LED Strips.
  • Lower temperature: extends life of LEDs, reduces light decay.
  • Protects against steam and water damage.
  • No discolouring of waterproof coating.
  • LEDs are mounted on a white PCB (Printed Circuit Board) for an attractive finish.

Specification

Energy RatingA
LED Quantity60 LED/Metre
LED Type/BrandSMD 2835 Epistar
Luminous flux (light output)480 lm/m(Warm), 502 lm/m(Pure)
Power Consumption4.8 W/m
Average life50,000 hours
Input Voltage12 V DC
DimmableYes (additional dimmer switch required)
Beam angle120°
Cable Length300mm
Waterproof RatingIP65
Width6mm
Thickness2mm
Warranty5 Years

Download Data Sheet

Description

For indoor use only. For outdoors we recommend our Fully Waterproof IP68 LED Strip.

Strip Lengths

This strip is sold in 5m lengths only. Each 5 metre strip is supplied with a 300mm input cable to both ends.

You can cut the strip to length yourself (with scissors), to as small as every 3 LEDs (5cm).

Up to 5 metres of LED strip can be wired in series with the driver. Additional LED strips need to be connected in parallel (see the Diagram).

Additional information

WeightN/A
Light Colour

Warm White ~ 3000 kelvin, Pure White ~ 5000 kelvin

1 review for Bendable Zig Zag” LED Strip Light IP65″

  1. Jacob Drummond

    I purchased these to add uplighters to the top of my kitchen cabinets, to sit inside an extrusion with a frosted cover. Given that there were a number of corners to trace the strip around, I wanted something to avoid having to cut and solder multiple lengths of tape, or from adding connectors which might leave gaps in the light output. Although traditionally marketed as being suited for backlighting letters for signage, the tape has proved perfect for my needs and given the Epistar LEDs and 50,000 hour lifespan, will hopefully last significantly longer than the cheaper, anonymously branded tape out there. Bear in mind that, as with most LED installations of this type, you may want to to add an inline dimmer to your setup to control the output. These are still a little too bright for mood lighting, despite only being 4.8W per metre, but at least the option is there.

Add a review

Your email address will not be published.

More Information

12V Power Supply

You need a LED 12 Volt Driver to power LED flexible strip. Each metre of this strip requires 4.8 watts, so choose a driver powerful enough to supply the total wattage required.

Power Requirement

Strip Length (M)12345
Power (W)510152024

Need help putting a kit together?

Contact the LED Strip experts now!