12V RGBW LED Strip Lights IP65
£17.50 – £71.62
£14.58 – £59.68excluding VAT
Available in lengths up to 5m and cuttable every 5cm, 12V RGBW LED strip.
RGBW LED Strip Fitted With The Latest Integrated RGB/White LED
This LED strip is fitted with a hybrid white and colour changing LED chips, ideal when both lighting effect are required.
Our RGBW LED Strip features the latest integrated LED giving a superior colour mix and colour strength compared with separate RGB and White chips. Consisting of 60 RGBW LEDs per metre. LEDs are mounted on a white PCB (Printed Circuit Board). Our RGBW strip lights have a 3M self adhesive backing for easy installation.
|LED Quantity||60 LED/Metre|
|LED Type/Brand||Integrated RGBW|
|Luminous flux (light output)||1000 lm/m (RGB+White)|
|Power Consumption||19.2 W/m (14.4W/m RGB, 4.8W/m White)|
|Average life||50,000 hours|
|Input Voltage||12 V DC|
|Colour||Various, depends on controller used.|
Download Data Sheet
Microtech Flexible LED Strip Light IP65 With High Grade Sanan RGBW LEDs
Manufactured using ultra efficient RGBW LEDs from Sanan, waterproof to IP65 rating using waterproof micro coating; almost invisible and highly effective.
Micro Tech LED Strip Advantages
- Better heat dissipation compared to thick Gel/Silicone coated LED Strips.
- Lower temperature: extends life of LEDs, reduces light decay.
- Protects against steam and water damage.
- No discolouring of waterproof coating.
- LEDs are mounted on a white PCB (Printed Circuit Board) for an attractive finish.
For indoor use only. For outdoors we recommend our Fully Waterproof IP68 RGB LED Strip.
1m, 2m, 3m, 4m, 5m
RGB + Warm White ~ 3000k, RGB + Natural White ~ 4000k, RGB + Pure White ~ 6000k
Only logged in customers who have purchased this product may leave a review.
This strip is sold by the metre. 12v LED Strip Lights are manufactured and supplied in 5m lengths, so purchases of strips less than 5m in length are non-returnable after they have been cut to size for you.
We supply 5 metre strips with an input cable at both ends. Shorter strips have an input cable at one end.
You can cut the strip to length yourself (with scissors), to as small as every 3 LEDs (5cm).
Up to 5 metres of LED strip can be wired in series with the controller. Additional LED strips need to be connected in parallel (see the Diagram).
12V Power Supply
You need a LED 12 Volt Driver to power LED flexible strip. Each metre of this strip requires 19.2 watts, so choose a driver powerful enough to supply the total wattage required.
|Strip Length (M)||1||2||3||4||5|
You need a colour controller to control RGBW LED flexible strip. The controller allows the selection of different colours and lighting effects. Our controllers also allow the strip to be dimmed.
Need help putting a kit together?
Contact the LED Strip experts now!