24V Digitally Addressable Pixel RGB COB LED Strip Lights 840 LED/m

Price range: £26.40 through £201.84
Price range: £22.00 through £168.20excluding VAT

High output and available up to 10m in length.

  • 12mm wide PCB
  • IC Type WS2811
  • PWM Frequency 2000Hz
  • 1000 Lumens pe metre
  • 12 W/m

The difference between COB and SMD LED Strips

  • No dotting with COB LED Strips.
  • More rigid PCBs.
  • Higher number of LEDs per metre (840).
  • More fluid lighting desing and colour change rate.

Add Ons:

Specification

Energy RatingA
LED Quantity840 LED/Metre
LED Type/DataCOB RGB/WS2811
Luminous flux (light output)986 lm/m (White)
Power Consumption12 W/m
Average life50,000 hours
Input Voltage24 V DC
DimmableYes
ColourVarious, depends on controller used.
Beam angle120°
Cable Length300mm
Waterproof RatingIP20
Width12mm
Thickness3mm
Warranty5 Years

Download Data Sheet

Description

Digitally Addressable Pixel RGB COB LED Strip Lights with Epistar LEDs

  • Lower temperature: extends life of LEDs, reduces light decay.
  • Easy installaion.
  • No discolouring LED Strip.
  • LEDs are mounted on a white PCB (Printed Circuit Board) for an attractive finish.

For indoor use only. For outdoors we recommend our Fully Waterproof IP68 LED Strip.

Additional information

Weight0.2 kg
Strip Length

1m, 2m, 3m, 4m, 5m, 6m, 7m, 8m, 9m, 10m

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

More Information

Strip Lengths

This strip is sold by the metre. This specific 24v LED strip light is manufactured and supplied in 5m lengths, so purchases of strips less than 5m in length are non-returnable after they have been cut to size for you.

We supply 5 metre strips with an input cable at both ends. Shorter strips have an input cable at one end.

You can cut the strip to length yourself (with scissors), to as small as every 5cm.

Up to 5 metres of LED strip can be wired in series with the controller. Additional LED strips need to be connected in parallel (see the Diagram).

24V Power Supply

You need a LED 24 Volt Driver to power LED flexible strip. Each metre of this strip requires 12 watts, so choose a driver powerful enough to supply the total wattage required.

Power Requirement

Strip Length (M)12345678910
Power (W)1224364860728496108120

Colour Controller

You Will require the M16-SPI to control RGB LED flexible strip. The controller allows the selection of different colours and lighting effects. The controller has 15 pre set functions.

Our RGB COB ditially addressable LED strip uses the data protocol WS2811.

Need help putting a kit together?

Contact the LED Strip experts now!