12V Colour Changing RGB LED Strip Lights 30 LED/m IP65

(2 customer reviews)

£7.76£34.49excluding VAT

Low powered, splash proof and available up to 5m in length.

RGB Colour Changing Strip Fitted with Epistar LEDs

Manufactured using latest ultra efficient Epistar 5050 LEDs, waterproof to IP65 rating using waterproof micro coating; almost invisible and highly effective. Fitted with ‘3M’ self adhesive backing for a secure fit.

Micro Tech LED Strip Advantages

  • Better heat dissipation compared to thick Gel/Silicone coated LED Strips.
  • Lower temperature: extends life of LEDs, reduces light decay.
  • Protects against steam and water damage.
  • No discolouring of waterproof coating.
  • LEDs are mounted on a white PCB (Printed Circuit Board) for an attractive finish.


Energy RatingA
LED Quantity30 LED/Metre
LED Type/BrandSMD RGB 5050
Luminous flux (light output)212 lm/m (White)
Power Consumption7.2 W/m
Average life50,000 hours
Input Voltage12 V DC
ColourVarious, depends on controller used.
Beam angle120°
Cable Length300mm
Waterproof RatingIP65
Warranty5 Years

Download Data Sheet


For indoor use only. For outdoors we recommend our Fully Waterproof IP68 LED Strip.

Strip Lengths

This strip is sold by the metre. 12v LED Strip Lights are manufactured and supplied in 5m lengths, so purchases of strips less than 5m in length are non-returnable after they have been cut to size for you.

We supply 5 metre strips with an input cable at both ends. Shorter strips have an input cable at one end.

You can cut the strip to length yourself (with scissors), to as small as every 3 LEDs (10cm).

Up to 5 metres of LED strip can be wired in series with the controller. Additional LED strips need to be connected in parallel (see the Diagram).

Additional information

Weight0.2 kg
Strip Length

1m, 2m, 3m, 4m, 5m

2 reviews for 12V Colour Changing RGB LED Strip Lights 30 LED/m IP65

  1. Stephen Peck (verified owner)

    We used this for mood lighting around a pool very effective

  2. Stephen Hart (verified owner)

    Excellent quality products, well packaged and delivered quickly. Prices are much the same as elsewhere but I can rely on these guys to get my order out quickly.

Only logged in customers who have purchased this product may leave a review.

More Information

12V Power Supply

You need a LED 12 Volt Driver to power LED flexible strip. Each metre of this strip requires 7.2 watts, so choose a driver powerful enough to supply the total wattage required.

Power Requirement

Strip Length (M)12345
Power (W)815222936

Colour Controller

You need a colour controller to control RGB LED flexible strip. The controller allows the selection of different colours and lighting effects. Our controllers also allow the strip to be dimmed.

Need help putting a kit together?

Contact the LED Strip experts now!