90 Degree LED Strip Corner Connector 10mm 2 Pin

(2 customer reviews)

This connector is used to connect two lengths of our 10mm single colour LED strip lighting together at a 90 degree corner. The LED strip light must be 10mm wide to use this connector. Before this connector can be used, gel waterproof coatings must be removed 7mm from the end of both strips. The LED strip can then slide inside the connector, passing under the metal arms. Ensure the arms are pushing down onto the copper contacts of the LED Strip. Then close the connector cover, ensuring the teeth clamp directly onto the circuit board of the LED strip not the gel coating.

This connector can be used with our Nano Tech LED Strip providing the thin waterproof coating is removed from the top of the copper terminals first. This can be done using a sharp blade or fine sandpaper.

This connector cannot be used with LED Strips with more than 60 LED/m, due to the high density of LEDs.

This connector is only suitable for connecting up to 5m of LED strip. To power longer lengths a soldered connection is required.

£2.51
£2.09excluding VAT

7996 in stock

SKU: CON-CORNER-10MM Categories: ,

Additional information

Weight0.1 kg

2 reviews for 90 Degree LED Strip Corner Connector 10mm 2 Pin

  1. Peter Seamer

    Bought this, together with some strip to strip connectors. Cleaned the ends of the strip, then gave up after several unsuccessful attempts to get the blocks to connect and resorted to soldering, which worked fine. Unable to call for advice as it was weekend. Maybe the web site could carry more guidance?

  2. Graeme Milne

    Bought these to replace broken ones.\r\nThey are good quality and do the job .\r\nThere are 2 sizes 8mm and 10 mm make sure you know which ones are required.\r\nI have no hesitation in recommending this company products.

Add a review

Your email address will not be published.