Orange LED Neon Flex Strip

Orange/Amber LED Neon Flex 7W/m 24V NF7

£49.84 – £85.14
£41.53 – £70.95excluding VAT

Orange 24V LED Neon Flex, ideal for decorative lighting. Waterproof to IP67 it can be used inside and out.

Fitted with Epistar 3014 LEDs – Amber/Orange

We’ve designed this Neon Flex in a way that the LEDs will only light to a maximum of 75% capacity. In return the LED life is extended making this one of the most reliable Neon Flex products available. Brightness isn’t compromised however, thanks to the ultra bright 3014 LED chip from Epistar.

This Neon Flex is fitted with 120 Epistar LEDs per metre, giving an almost perfect line of light, dotting reduces to a minimum. It’s also waterproof to IP67 rating; LEDs are encapsulated in a robust and flexible silicone housing.

SKU: NF7-ORANGE-24V Category:

Add Ons:

Specification

Energy RatingA
LED Quantity120 LED/Metre
LED Type/BrandSMD 3014 / Grade A ‘Epistar’
Luminous flux (light output)50 lm/m
Light colourOrange/Amber (585~590nm)
Power Consumption7 W/m
Average life50,000 hours
Input Voltage24 V DC
DimmableYes
Beam angle120°
Cable Length1m
Waterproof RatingIP67
Width4mm
Height10mm
Warranty5 Years

Download Data Sheet

Description

LED Flex Lengths

This LED Neon Flex is sold in 2.5m and 5m lengths. We can also supply bespoke lengths in increments of 5cm by special order with a 7-14 day lead time – Contact us for details.

As standard, 24v LED Neon Flex is manufactured and supplied in 5m lengths, so purchases of strips less than 5m in length are non-returnable after they have been cut to size or specially manufactured for you.

We supply 5 metre Neon strips with an input cable at both ends. Shorter strips have an input cable to one end.

Cutting, Sealing and Mounting LED Neon Flex

This Neon Flex can be cut with scissors, to as small as every 6 LEDs (5cm). Once cut the end of the Neon Flex will need sealing. We sell small tubes of clear silicone, solid rubber end caps and end caps with cable entry – see related products at the bottom of this page.

The Neon Flex is held in position using small metal clips which screw down into position – see related products at the bottom of the page.

Additional information

Weight0.2 kg
Strip Length

2.5m, 5m

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

More Information

Powering LED Neon Flex

Up to 5 metres of Neon Flex can be wired in series with a 24V driver. Additional Neon strips need to be connected in parallel (see the Diagram).

24V Power Supply

A 24 Volt Driver is required to power LED Neon Flex. Each metre of Neon Flex requires 7 watts, so choose a driver powerful enough to supply the total wattage required.

Power Requirement

Strip Length (M)12345678910
Power (W)7142128354249566370

Need help putting a kit together?

Contact the LED Neon experts now!

Related Categories

LED Strip Lights

Our LED strip lights can be operated in various ways: remote control, touch-sensitive wall controllers, via a WiFi device or simply a traditional light switch.

LED Controllers and Dimmers

Single colour LEDs can be controlled with a dimmer. We stock a variety of LED Dimmer controllers suitable for dimming mains or low voltage light fittings.

LED Drivers

An LED Driver is designed specifically for the job. We stock both ‘standard’ and ‘mains dimmed’ LED drivers.

Aluminium Profile

We offer a range of aluminium housings, each one is designed to be compatible with our LED Strip range. Simply choose the one that best suits your installation.