Additional information
Weight | 0.5 kg |
---|
This LED Driver power supply can be used to power up to 72 watts of our 12 volt single colour and RGB colour changing LED Strip Lights. The driver features a 3 Pin UK Plug on the input cable for a plug and go installation and a 12-volt jack on the output cable. If required a 12V Female Connector can be fitted on the output to give a positive and a negative terminal for direct connection with our single colour LED Strip Lights. In the case of RGB Colour Changing LED Strip Lights, the 12V jack could be removed if the RGB Colour Controller is fitted with screw terminals allowing direct connection.
UK 3 pin plug may be removed by a suitably qualified professional and wired directly into 240V AC mains power via a fused spur to enable lighting to operate off the original light switch.
£24.02
£20.02excluding VAT
Input Voltage | 220-240 V AC | |
---|---|---|
Output Voltage | 12 V DC | |
Output Power | 72 W | |
Output type | Constant Voltage | |
Length | 114mm | |
Width | 50mm | |
Depth | 34mm | |
Warranty | 2 Years |
Weight | 0.5 kg |
---|
Only logged in customers who have purchased this product may leave a review.
David Freeman –
These drivers are good but could do with some form of bracket to allow them to be fixed.
Andreas Kapsalis –
Top stuff!!………………………………………..
Neil Hailey –
used in expo displays, simply and easy to use. |What you want for quick set up and get away
Natasha Redrup (verified owner) –
Driving display lighting 24/7 ………………..
Simon Slavin (verified owner) –
Unit is small, appears of high quality, and gives off little waste heat. Both input (mains) lead and the output lead are long enough to be useful, unlike some competing units. Happy with these.
Steve Haughton (verified owner) –
These were installed inside a cabinet on a turbo molecular vacuum filling rig. I would recommend these to everyone who’s looking for a high quality product.
Mark Ferguson (verified owner) –
Very good quality, well put together and good 12V power supply. Would perhaps be better if the mains lead was supplied with a rewireable mains plug so that the cable could be shortened to the required length, but not a real problem just means you need to cut the mains plug off and use your own.