Featuring RJ45 and 3pin XLR DMX sockets.The DMX address is displayed digitally and adjusted by pressing buttons mounted next to the display or Via RDM function. The frequency of the output (PWM signal) and the dimming curve can both be adjusted to give optimum dimming across the four output channels. Also the dimming increments can be adjusted to either 8bit (256 levels) or 16bit (65536 levels).
This control receiver requires a DMX control signal in order to function (see related products below).
This controller has the capacity to power up to 288 Watts of 12V LED lighting or 576 Watts of 24V LED lighting. It requires an LED driver in order to ‘power up’ and light the LEDs connected to it. The power output of this receiver is limited by the power output of the LED driver. To power 240 Watts of LED lighting you would need to use a 240 watt LED driver.
The controller has four fixing/mounting points situated on the base.
|Output||DC Constant Voltage|
|Max output power||288w/576w (12v/24v)|
|Dimensions (mm)||122L 110W 37H|