LED Neon Flex Top Lit 24v 16x16mm RGBW

£25.87£253.44
£21.56£211.20excluding VAT

White 24V LED Neon Flex, ideal for decorative lighting. Waterproof to IP67 it can be used inside and out.

Fitted with Epistar 3014 LEDs

We’ve designed this Neon Flex in a way that the LEDs will only light to a maximum of 75% capacity. In return the LED life is extended making this one of the most reliable Neon Flex products available. Brightness isn’t compromised however, thanks to the ultra bright 3014 LED chip from Epistar.

This Neon Flex Light is fitted with 120 Epistar LEDs per metre, giving an almost perfect line of light, dotting reduces to a minimum. It’s also waterproof to IP67 rating; LEDs are encapsulated in a robust and flexible silicone housing.

SKU: NF16-RGBW-4000K Category: Tag:

Specification

Energy RatingA
LED Quantity120 LED/Metre
LED Type/BrandSMD 3014 / Grade A ‘Epistar’
Luminous flux (light output)225 lm/m
Power Consumption7 W/m
Average life50,000 hours
Input Voltage24 V DC
DimmableYes
Beam angle120°
Cable Length1m
Waterproof RatingIP67
Width4mm
Height10mm
Warranty5 Years

 

Description

Cutting, Sealing and Mounting LED Neon Flex

This Neon Flex can be cut with scissors, to as small as every 6 LEDs (5cm). Once cut the end of the Neon Flex will need sealing. We sell small tubes of clear silicone, solid rubber end caps and end caps with cable entry – see related products at the bottom of this page.

The Neon Flex is held in position using small metal clips which screw down into position – see related products at the bottom of the page.

Powering LED Neon Flex

Up to 10 metres of Neon Flex can be wired in series with a 24V driver. Additional Neon strips need to be connected in parallel (see the Diagram).

Additional information

WeightN/A
Strip Length

1m, 2m, 3m, 4m, 5m, 6m, 7m, 8m, 9m, 10m

Light Colour

RGB + Warm White ~ 3000k, RGB + Natural White ~ 4000k, RGB + Pure White ~ 6000k

Reviews

There are no reviews yet.

Be the first to review “LED Neon Flex Top Lit 24v 16x16mm RGBW”

Your email address will not be published.

More Information

LED Flex Lengths

This LED Neon Flex is sold in 2.5m, 5m, 7.5m and 10m lengths. We can also supply bespoke lengths in increments of 5cm by special order with a 7-14 day lead time – Contact us for details.

As standard, 24v LED Neon Flex is manufactured and supplied in 10m lengths, so purchases of strips less than 10m in length are non-returnable after they have been cut to size or specially manufactured for you.

We supply 10 metre Neon strips with an input cable at both ends. Shorter strips have an input cable to one end.

24V Power Supply

A 24 Volt Driver is required to power LED Neon Flex. Each metre of Neon Flex requires 19 watts, so choose a driver powerful enough to supply the total wattage required.

Power Requirement

Strip Length (M)12345678910
Power (W)1938577695114133152171190

Need help putting a kit together?

Contact the LED Neon experts now!