SL7-24V-IP68 Waterproof White LED Strip

£31.28£129.94
£26.07£108.28excluding VAT

The only LED Strip suitable for use outdoors or in very wet areas, IP68 waterproof.

Fitted with Epistar LEDs

This LED strip is built with high grade Epistar LEDs for superior performance. This strip is fitted with 60 LEDs per metre. The light strip is waterproof to IP68 rating, encapsulated in a square silicone tube and injected with liquid silicone making it completely water tight.

This LED strip has been designed so the LEDs operate at half capacity. This is to reduce the possibility of the LEDs overheating inside the thick waterproof coating encasing them.

Specification

Energy RatingA
LED Quantity60 LED/Metre
LED Type/BrandSMD 2835 / Grade A ‘Epistar’
Luminous flux (light output)660 lm/m(Warm), 690 lm/m(Natural)
Light colour3000k, 4000k
Power Consumption7 W/m
Average life50,000 hours
Input Voltage24 V DC
DimmableYes
Beam angle120°
Cable Length1m
Waterproof RatingIP68
Width12mm
Thickness4mm
Warranty5 Years

Download Data Sheet

Description

Strip Lengths

This LED strip is sold in 2.5m, 5m, 7.5m and 10m lengths. We can also supply bespoke lengths in increments of 10cm by special order with a 10-14 day lead time – Contact us for details.

As standard, this LED Strip is manufactured and supplied in 5m and 10m lengths, so purchases of strips other than these standard lengths are non-returnable as they have been cut to size or specially manufactured for you.

We supply 5m and 10m strips with an input cable at both ends. Other length (2.5m and 7.5m) strips have an input cable at one end.

Cutting and Sealing the LED Strip

The LED strip can be cut with scissors, to as small as every 6 LEDs (10cm). Once cut the end of the LED strip will need sealing. We sell small tubes of clear silicone and clear rubber end caps which can be used to seal the cut end of the LED strip. Select the ‘Sealing Kit’ in the blue options box if required. The kit includes two end caps and 1 small tube of silicone.

The LED strip is self adhesive backed, however water can degrade the adhesive over time. Alternatively, we sell clear mounting clips which screw down to secure the LED strip. Select ‘Mounting Clips’ in the blue options box if required. They are sold in packs of 20.

Up to 10 metres of LED strip can be wired in series with a 24V driver. Additional LED strips need to be connected in parallel (see the Diagram).

Additional information

WeightN/A
Light Colour

Warm White ~ 3000 kelvin, Natural White ~ 4000 kelvin

Strip Length

2.5m, 5m, 7.5m, 10m

Sealing Kit Required

No, Yes

Mounting Clips Required

No, Yes

1 review for SL7-24V-IP68 Waterproof White LED Strip

  1. Paul Bates

    good quality did the job perfectly lets see how long they last I have had others in my garden thats been there 4 years

Add a review

Your email address will not be published.

More Information

24V Power Supply

You need a LED 24 Volt Driver to power LED strip. Each metre of this strip requires 7 watts, so choose a driver powerful enough to supply the total wattage required.

Power Requirement

Strip Length (M)12345678910
Power (W)7142128354249566370

Need help putting a kit together?

Contact the LED Strip experts now!