12V CCT Adjustable White LED Strip IP65

£16.45£76.95excluding VAT

Up to 5 metres in length, the shade of white light can be adjusted with the addition of a suitable controller. Fitted with the latest generation of CCT LED, each LED has a warm and cool section for superior colour mixing.

Fitted with 120 LEDs per metre, each LED can be adjusted between ultra warm (2400k) and cool (6000k) white using our CCT controller. The LEDs are designed to produce approximately the same amount of light (lumens) regardless of the colour chosen.

Microtech Flexible LED Strip Light IP65 With High Grade Sanan 3527 LEDs

Manufactured using latest ultra efficient Sanan 3527 LEDs, waterproof to IP65 rating using waterproof micro coating; almost invisible and highly effective. Fitted with ‘3M’ self adhesive backing for a secure fit.


Energy RatingA
LED Quantity120 LED/Metre
LED Type/BrandSMD 3527 / Grade A ‘Sanan’
Luminous flux (light output)835 lm/m(Warm 2400k), 950 lm/m(Cool 6000k)
CCT range (colour temperature)2400k ~ 6000k
Power Consumption of 2400K LEDs9.6 W/m
Power Consumption of 6000K LEDs9.6 W/m
Average life50,000 hours
Input Voltage12 V DC
DimmableYes (using our CCT controller)
Beam angle120°
Cable Length300mm
Waterproof RatingIP65
Warranty5 Years

Download Data Sheet


Micro Tech LED Strip Advantages

  • Better heat dissipation compared to thick Gel/Silicone coated LED Strips.
  • Lower temperature: extends life of LEDs, reduces light decay.
  • Protects against steam and water damage.
  • No discolouring of waterproof coating.
  • LEDs are mounted on a white PCB (Printed Circuit Board) for an attractive finish.

For indoor use only. For outdoors we recommend using fully waterproof IP68 LED Strip, Contact us for details.

To control your CCT LED Strips we recommend you use our CCT White Adjustable Controllers.

Strip Lengths

This strip is sold by the metre. This 12v CCT LED Strip Light is manufactured and supplied in 5m lengths, so purchases of strips less than 5m in length are non-returnable after they have been cut to size for you.

We supply 5 metre strips with an input cable at both ends. Shorter strips have an input cable at one end. The cable consists of 3 cores; white, yellow, brown.

You can cut the strip to length yourself (with scissors), to as small as every 3 LEDs (2.5cm).

Up to 5 metres of LED strip can be wired in series with the driver. Additional LED strips need to be connected in parallel (see the Diagram).

Additional information

Strip Length

1m, 2m, 3m, 4m, 5m

1 review for 12V CCT Adjustable White LED Strip IP65

  1. Brian Knox (verified owner)

    Great product, easy to install and very effective – especially with diffuser. Excellent colour temperature range and smooth dimming used with the LTech RF Contoller

Only logged in customers who have purchased this product may leave a review.

More Information

12V Power Supply

You need a LED 12 Volt Driver to power LED flexible strip. Each metre of this strip requires 9.6 watts, so choose a driver powerful enough to supply the total wattage required.

Power Requirement

Strip Length (M)12345
Power (W)1020293948

Need help putting a kit together?

Contact the LED Strip experts now!