Flexible LED Strip to Strip Connector RGBW 12mm 5 Pin

This connector is used to connect two lengths of RGBW colour changing LED strip together. The LED strip light must be 12mm wide to use this connector. Before this connector can be used, gel waterproof coatings must be removed 7mm from the end of both LED strips. The LED strip can then slide inside the connector, passing under the metal arms. Ensure the arms are pushing down onto the copper contacts of the LED Strip. Then close the connector cover, ensuring the teeth clamp directly onto the circuit board of the LED strip not the gel coating.

This connector can be used with our Nano Tech LED Strip providing the thin waterproof coating is removed from the top of the copper terminals first. This can be done using a sharp blade or fine sandpaper.

This connector is approximately 150mm long.

This connector is only suitable for connecting up to 5m of LED strip. To power longer lengths a soldered connection is required.

£2.71
£2.26excluding VAT

96013 in stock

SKU: CON-INT-RGBW-FLEX Categories: ,

Specification

Energy RatingA
LED Quantity60 LED/Metre
LED Type/BrandSMD 2835 Epistar
Luminous flux (light output)480 lm/m(Warm), 502 lm/m(Pure)
Power Consumption4.8 W/m
Average life50,000 hours
Input Voltage12 V DC
DimmableYes (additional dimmer switch required)
Beam angle120°
Cable Length300mm
Waterproof RatingIP65
Width6mm
Thickness2mm
Warranty5 Years

Download Data Sheet

Additional information

Weight0.01 kg

Reviews

There are no reviews yet.

Be the first to review “Flexible LED Strip to Strip Connector RGBW 12mm 5 Pin”

Your email address will not be published.

More Information

12V Power Supply
You need a LED 12 Volt Driver to power LED flexible strip. Each metre of this strip requires 4.8 watts, so choose a driver powerful enough to supply the total wattage required.

Power Requirement

Strip Length (M)12345
Power (W)510152024

Need help putting a kit together? Contact us now!