This control receiver requires a DMX control signal in order to function (see related products below).
The DMX address is displayed and adjusted by ‘dip switches’on the side of the unit or Via RDM function. The address is then stored mechanically by the dip switches or electronically when using RDM.
This controller has the capacity to power up to 288 Watts of 12V LED lighting or 576 Watts of 24V LED lighting. It requires an LED driver in order to ‘power up’ and light the LEDs connected to the output. The power output of this receiver is limited by the power output of the LED driver. To power 240 Watts of LED lighting you would need to use a 240 watt LED driver.
The main benefit of this unit compared to other DMX receivers is that DMX cables can connect via standard DMX XLR-3, RJ45 or screw terminals. It also has the ability to amplify a DMX signal, increasing the possible number of DMX decoders on a circuit.
The controller has two fixing points situated on the base so it can be screwed down.
Note well: the photo displays two units however they are sold individually, the price is for one.
9903 in stock
|Current||6A ?4CH Max 24A|
|Max output power||288W/576W(12V/24V)|
|Dimensions (mm)||156L 78W 40H|