LED Dimmers
Single colour LEDs can be controlled with a dimmer. We stock a variety of LED Dimmer controllers suitable for dimming mains or low voltage light fittings.
RGB and RGBW colour-changing LED lights require a colour controller.
Free Delivery for orders over £120
12 Years of Experience
5 Year Warranty
Rapid Delivery Worldwide
-
1-10V Dimming Interface 144W
£38.50 Add to basket -
F1 Single Zone Remote Control Dimmer
£23.10 Add to basket -
F5 Multi Zone Remote Control Dimmer
£23.76 Add to basket -
Inline LED Strip Dimmer, 12V – 24V
£5.45 Add to basket -
Multi-Zone Touch Wall Mounted LED Dimmer EX5
£56.65 Add to basket -
Q1 Multi Zone Dimmer RF Remote Controller
£45.32 Add to basket -
Remote Control LED Strip Dimmer with Receiver
£34.65 Add to basket -
Wired Touch Panel LED Strip Dimmer, 12V – 24V
£45.10 Add to basket -
Wireless/DMX LED Touch Panel Dimmer, 12V – 24V
£51.37 Add to basket -
0/1-10V Dimmed LED Driver 20W 24V
£23.65 Add to basket -
0/1-10V Dimmed LED Driver 45W 24V
£32.89 Add to basket -
0/1-10V Dimmed LED Driver 60W 24V
£43.89 Add to basket -
0/1-10V Dimmed LED Driver 100W 24V
£65.89 Add to basket -
0/1-10V Dimmed LED Driver 200W 24V
£114.40 Add to basket -
LED Strip Dimmer Module 1 or 2 Way
£18.15 Add to basket -
1-10V Dimmer Module 1 or 2 Way
£18.15 Add to basket -
LED Strip Dimmer Switch 1 Gang 1 or 2 Way
£20.35 Add to basket -
RGB(W) WiFi-106 LED Strip Controller Single or Multi-Zone
£176.00 Add to basket -
RGB(W) WiFi-108 Smart LED Strip Controller Single or Multi-Zone
£242.00 Add to basket
Options when Dimming white or single colour 12V or 24V LED Strip Lights
Mains Voltage Dimming is suitable when a “traditional” wall-mounted dimmer switch must be used. A “Dimmable Mains to low voltage” LED Driver must also be used to power the lighting.
12/24V Dimming
12V/24V Dimming is the most popular way of dimming our LED Strip. A 12V/24V dimmer controller and a standard 12V/24V LED Driver must be used. It usually offers a better range of dimming compared to mains dimming and allows remote control, wifi or touch panel dimming.
-
0/1-10V Dimming
0/1-10V Dimming is usually used for commercial or large domestic LED Strip installations. A 0/1-10V dimmer switch is required to generate the 0/1-10V control signal. A 0/1-10V dimmable Driver receives the 0/1-10V control signal and PWM dims the output at 12 or 24V (depending on the Driver). Multiple 0/1-10V Drivers can be used with one dimmer switch allowing for a large setup with smooth and gradual dimming range.
Dimming RGB(W) Colour Changing LED Strip Lights
RGB(W) LED Strip is controlled by a Colour Controller which dims as well as colour change. No additional dimmer control can be used from this section for RGB(W) lights.
