Plug and Go LED spike light kit including three LED spike lights, one 12 volt power supply and two 'T' splitters.
Waterproof "IP65" LED spike light kit with quick and easy "plug and go" installation. Each cable has a push and screw connection incorporating a rubber gasket which compresses to provide a weather tight seal.
Each spike light is built with a high power 5W Cree LED chip for superior light output, efficiency and life. Light output is comparable to 35W and 50W halogen spike lights.
Our LED Spike lights have a pure Aluminium die cast casing with toughened 5mm clear safety glass - making them one of the most robust LED Spike lights available.
Powder coated with a black UV stable "Akzo Nobel" finish and fitted with stainless steel '304' fixings, these lights will continue looking great regardless of weather conditions.
Each spike light is fitted with a 40cm power cable, this can be extended using our extension cables.
The LED driver supplied is IP68 rated for outdoor use. It is not fitted with a UK 3 PIN plug, this would either need to be added by yourself or hard wired into a suitable outlet. The output cable from the driver can be extended using our extension cables.
Specifications
Energy Rating | | A |
Finish | | Black UV stable powder coating from "Akzo Nobel" |
LED Type/Brand | | Chip-on-Board (COB) |
Luminous flux (light output) per light | | 400lm |
Power/Wattage per spike light | | 5 W |
Popular Replacement for | | 35 & 50 W Halogen Spike lights |
Average life | | 50,000 hours |
Input Voltage | | 12V AC or DC |
Dimmable | | No |
Colour | | Warm White ~ 3000k, Natural White ~ 4000k, pure white ~5000k |
Beam angle | | 24° |
Splike light cable length | | 40cm |
Power supply cable length | | 180cm |
Head Depth | | 100mm |
Head Diametre | | 65mm |
Total Height | | 240mm |
Warranty | | 3 Years |