Medium strength high density LED Strip ideal for display lighting.
Microtech Flexible LED Strip Light IP65 With High Grade Epistar 3014 LEDs
Manufactured using latest ultra efficient Epistar 3014 LEDs, waterproof to IP65 rating using waterproof micro coating; almost invisible and highly effective. Fitted with "3M" self adhesive backing for a secure fit.
Micro Tech LED Strip Advantages
- Better heat dissipation compared to thick Gel/Silicone coated LED Strips.
- Lower temperature: extends life of LEDs, reduces light decay.
- Protects against steam and water damage.
- No discolouring of waterproof coating.
- LEDs are mounted on a white PCB (Printed Circuit Board) for an attractive finish.
For indoor use only. For outdoors we recommend our Fully Waterproof IP68 LED Strip.
Strip Lengths
This strip is sold by the metre. 24v LED Strip Lights are manufactured and supplied in 10m lengths, so purchases of strips less than 10m in length are non-returnable after they have been cut to size for you.
We supply 10 metre strips with an input cable at both ends. Shorter strips have an input cable at one end.
You can cut the strip to length yourself (with scissors), to as small as every 6 LEDs (5cm).
Up to 10 metres of LED strip can be wired in series with the driver. Additional LED strips need to be connected in parallel (see the Diagram).
N.B 'clip on' connectors cannot be used with this LED strip due to the high density of LEDs. Soldered connections can be made instead, contact us for advice.
24V Power Supply
You need a LED 24 Volt Driver to power LED flexible strip. Each metre of this strip requires 9.6 watts, so choose a driver powerful enough to supply the total wattage required.
Power Requirement
Strip Length (M) | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
Power (W) | | 10 | 20 | 29 | 39 | 48 | 58 | 68 | 77 | 87 | 96 |
Need help putting a kit together?
Contact the LED Strip experts now!
Departments related to this product…
Specification
Energy Rating | | A |
LED Quantity | | 120 LED/Metre |
LED Type/Brand | | SMD 3014 Epistar |
Luminous flux (light output) | | 936 lm/m(Warm), 948 lm/m(Natural), 1010 lm/m(Pure), 916 lm/m(Cool) |
Power Consumption | | 9.6 W/m |
Average life | | 50,000 hours |
Input Voltage | | 24V DC |
Dimmable | | Yes (additional dimmer switch required) |
Beam angle | | 120° |
Cable Length | | 300mm |
Waterproof Rating | | IP65 |
Width | | 10mm |
Thickness | | 2mm |
Warranty | | 5 Years |
Product Data Sheet
Product Data Sheet PDF
Wiring Diagram
