This 4.8 Watt per metre LED strip has a 'Zig Zag' shaped circuit board, making it bendable; easier for turning corners on the flat. It's often used to back light letters.
Microtech Flexible LED Strip Light IP65 With High Grade Epistar 2835 LEDs
Manufactured using latest ultra efficient Epistar 2835 LEDs, waterproof to IP65 rating using waterproof micro coating; almost invisible and highly effective. Fitted with "3M" self adhesive backing for a secure fit.
Micro Tech LED Strip Advantages
- Better heat dissipation compared to thick Gel/Silicone coated LED Strips.
- Lower temperature: extends life of LEDs, reduces light decay.
- Protects against steam and water damage.
- No discolouring of waterproof coating.
- LEDs are mounted on a white PCB (Printed Circuit Board) for an attractive finish.
For indoor use only. For outdoors we recommend our Fully Waterproof IP68 LED Strip.
This strip is sold in 5m lengths only. Each 5 metre strip is supplied with a 300mm input cable to both ends.
You can cut the strip to length yourself (with scissors), to as small as every 3 LEDs (5cm).
Up to 5 metres of LED strip can be wired in series with the driver. Additional LED strips need to be connected in parallel (see the Diagram).
12V Power Supply
You need a LED 12 Volt Driver to power LED flexible strip. Each metre of this strip requires 4.8 watts, so choose a driver powerful enough to supply the total wattage required.
|Strip Length (M) ||1||2||3||4||5|
|Power (W) ||5||10||15||20||24|
Need help putting a kit together?
Contact the LED Strip experts now!
Departments related to this product…
|Energy Rating ||A|
|LED Quantity ||60 LED/Metre|
|LED Type/Brand ||SMD 2835 Epistar|
|Luminous flux (light output) ||480 lm/m(Warm White), 510 lm/m(Pure White)|
|Power Consumption ||4.8 W/m|
|Average life ||50,000 hours|
|Input Voltage ||12 V DC|
|Dimmable ||Yes (additional dimmer switch required)|
|Beam angle ||120°|
|Cable Length ||300mm|
|Waterproof Rating ||IP65|
|Warranty ||5 Years|
CE and ROHS approved to comply with UK safety regulations.