• Model: DX5
  • Weight: 0.24 Kg
  • In Stock
  • Condition: New
  • Category: Multi Zone LED Dimming
  • Payments Accepted: Visa, MasterCard
  • Normal Max Despatch Lead Time: 01 Days


Multi-Zone Wireless Wall Mounted LED Strip Dimmer

£46.90 Ex VAT
£56.28 Inc VAT

Average Rating: 0

Control up to 4 zones of LED lighting within a 30m radius with or without wires!

Touch sensitive control panel, same size as a standard UK wall switch. Compatible with standard 35mm deep plastic back boxes, back box is not included. Extremely easy to install, setup and operate. Control up to 4 lighting zones individually or simultaneously by Radio Frequency or DMX wire via control receivers (available to buy separately)

Turn the lighting zone(s) on, set the light levels then save the scene for future use using one of the three scene saving buttons on the controller.

Key product features

  • Intuitive operation, very easy to use.
  • Controls each zone receiver via 2.4Hz Radio Frequency, no wiring required.
  • Alternatively the controller has a DMX 512 output for controlling LEDs by wire.
  • Controls 4 lighting zones individually with the ability to control multiple zones simultaneously.
  • Three scene save buttons enabling all zones to be set to a previous light level at the touch of a button.
  • Each touch is confirmed with a quite musical chord and LED indicator light.
  • Pioneered T-PWM dimming technology+ 4096 gray scale gives a perfectly smooth dimming performance.
  • High accuracy touch sensors with IC+special post-processing gives precise touch control.
  • Each zone receiver can control LED lights from 12V - 24V DC, the input voltage must match the output voltage.
  • Same size as a standard UK light switch
  • Sleek design with high grade tempered glass front panel.
  • Each receiver can control up to 240Watts of 12V single colour LED Strip. Multiple receivers can be synced to each zone if required.

Suggested matching items...

Zone Receivers: This control panel transmits a wireless RF and DMX512 control signal. The signal is received by zone control receivers (available to buy separately, see 'matching items' below) which then control the LED lights. Choose either a wired connection using DMX receivers or wireless connection using R4-5A receivers or a mixture of both. Multiple receivers can be added to each of the 4 zones on the touch panel controller.

WiFi Control: With the addition of a WIFI-104 controller, wireless zone receivers (R4-5A) can be controlled using a smart phone or WiFi enables device as well as the touch panel controller.

Specification

Input voltage AC100~240V
Output signal RF 2.4G+DMX512
Gray scale level 4096
Control mode 4 Zones control
RF Remote distance 30m
Working temperature -20℃ - 60℃
Dimensions L86×W86×D36mm
Fixing Screw Centres 60mm
Warranty 5 Years
Multi Zone Wall Mounted LED Strip Dimmer connection diagram