Luxury Tilting Downlight - IP65 Waterproof, Fire Rated and Dimmable!
An impressive LED downlight manufactured by UK based 'Integral'. Not only does it conform to 30, 60 and 90 mins fire rating but also carries an IP65 waterproof rating. This makes it perfect for use in kitchens and bathrooms. It's also dimmable and is air tightness compliant with Part C and Part L. Resistance to Sound compliant with Part E.
Designed to deliver a low-glare, high quality light with a contemporary design that will look impressive in any setting. Light beam has softened edges for a luxurious effect.
Easy to install with a low-profile body. Complete with Loop-in / Loop-out driver.
Dimmable LED Downlight
This LED Downlight can be used on a standard on/off switch or dimmer switch. Integral recommends the Varight V-Pro range of dimmer switches, designed specifically for dimming LEDs.
A Stand Alone Light Fitting!
This downlight requires no extra parts, simply cut a hole in the ceiling (approx 92mm diameter) insert the downlight unit and connect to the mains Voltage 220-240V AC. The downlight has a low voltage transformer built onto the power lead to supply the LED's. No additional frame or connector required, it's all built in.
|Energy Rating ||A+|
|LED Quantity ||1|
|Fire Rating ||30, 60, 90min|
|Water Ingress Protection ||IP65 - all bathroom zones|
|Frame Finish ||Matt White|
|LED Type/Brand ||COB|
|Colour Rendering Index (CRI) ||>80|
|Luminous flux (light output) ||650 lm|
|Total Power Usage ||9W|
|Popular Replacement for ||50 W Halogen|
|Average life ||35,000 hours|
|Input Voltage ||220 - 240V AC|
|Dimmable ||Yes (with Varilight V-Pro switches)|
|Beam angle ||55° |
|Ceiling Cut Out ||92mm|
|Warranty ||3 Years|